What an HVAC dispatcher should ask before sending a tech
Tark AI Team ยท
An HVAC dispatcher should ask twelve things before booking: the symptom in the caller's words, when it started, what the caller already tried, whether the thermostat has power, equipment type and age, the brand on the label, whether anyone smells gas or hears a new noise, whether water is pooling, the service address and access details, who will be home, and whether the caller is an existing customer with a maintenance plan.
The intake checklist to put next to every phone
Print this. Tape it to the monitor. The order matters, because the first three questions decide whether the rest of the call is a booking or an emergency handoff.
- "What is the system doing right now?" Write the caller's exact words. "Blowing warm" and "not turning on" are different trucks.
- "Does anyone in the house smell gas, or did a carbon monoxide alarm go off?" If yes, stop and go to the safety script below.
- "When did it start, and has it happened before?"
- "What have you already tried?" Breaker, thermostat batteries, filter, the outdoor disconnect. Most callers have tried something and will not volunteer it.
- "Does the thermostat show anything on the screen?" Blank screen points one way, a display with a call for cooling and nothing running points another.
- "Is this a furnace, a heat pump, a package unit on the roof, or a split system with an outdoor unit?" If the caller does not know, ask whether there is a metal box outside with a fan on top.
- "Roughly how old is the equipment?" Under five, five to twelve, over twelve. Do not ask for the exact year; nobody knows it.
- "Can you read the brand off the outdoor unit or the furnace door?"
- "Is there water on the floor near the indoor unit, or dripping from the ceiling?"
- "What is the service address, and is there a gate code, a dog, or a locked side yard?"
- "Who will be home, and what is the best number to text when the tech is on the way?"
- "Have we been out to this address before, and are you on a maintenance plan?" Plan customers get the priority slot you promised them when they signed.
Twelve questions sounds like a lot. Spoken at normal pace, with the caller answering in short bursts, it takes under five minutes. The calls that run fifteen minutes are the ones where the dispatcher skips the list and lets the caller tell the story from the beginning.
Which calls are emergencies and which can wait until tomorrow?
Most HVAC calls are not emergencies. The dispatcher's job is to find the few that are, route them in under a minute, and put everything else into the right slot without over-promising.
| What the caller reports | Priority | What the dispatcher does | What not to say |
|---|---|---|---|
| Smell of gas, or a CO alarm sounding | Safety | Read the gas script, end the call, book after the utility clears the home | "We'll send someone to take a look" |
| No heat, outside temperature below freezing, infant or elderly person in the home | Same day | First open slot, on-call tech if after hours | "Tomorrow morning is the earliest" |
| No cooling, heat advisory in effect, medical condition in the home | Same day | First open slot, offer a portable unit if the company keeps loaners | "Everyone is having this problem today" |
| No cooling, mild weather, no medical issue | Next available | Standard booking, note what the caller tried | "It is probably the capacitor" |
| Water leaking from the indoor unit onto a finished ceiling | Same day | Tell the caller to turn the system off at the thermostat, book the first slot | "Put a bucket under it for now" |
| Unit running but short cycling, new noise, higher bill | Scheduled | Next available diagnostic slot | Any guess at a cause |
| Thermostat blank, caller has not checked the breaker | Phone first | Walk the caller through the breaker and thermostat batteries before booking | "That will be a service call either way" |
The same-day rows for heat and cold follow the CDC's list of who is most at risk in extreme heat: adults over 65, infants and young children, and people with chronic conditions. The dispatcher does not judge the medical situation. The caller's answer to "is anyone in the home elderly, an infant, or unwell" picks the row.
The last row is the one owners argue about. Walking a caller through a tripped breaker costs you a service fee today. It also produces the customer who tells three neighbors that you talked them out of a visit, which is worth more than the fee. We have listened to a lot of these calls, and the dispatcher who says "let's try one thing first" books more replacement jobs over the following year than the one who sends a truck for a breaker.
What should the dispatcher say when a caller smells gas?
Read this word for word. Do not paraphrase it, and do not let a new hire improvise it.
"I need you to do a few things right now. Leave the house and take everyone with you, including pets. Do not turn any lights or appliances on or off on the way out. Once you are outside, call your gas company's emergency line or 911. After they have checked the house and told you it is safe, call us back and we will get a technician out the same day. Do you want me to stay on the line while you get outside?"
A gas smell is the gas utility's call first and the HVAC company's call second. The same rule applies to a sounding carbon monoxide alarm; the CPSC's guidance for a CO alarm is to move everyone to fresh air and call 911 or the fire department before anything else. The dispatcher's job on that call is to get people out of the building, not to book an appointment.
Why does the technician need the equipment type and age before the visit?
Because the truck stock and the conversation on site depend on it. A twelve-year-old R-22 split system with a failed compressor is a replacement conversation, and the tech should arrive ready to have it, with the comfort advisor's calendar open. A three-year-old heat pump under parts warranty is a repair conversation, and the tech needs the model number to check coverage before quoting. Refrigerant handling itself is regulated under EPA Section 608, so a tech who knows the refrigerant type before arrival loads the right recovery equipment instead of making a second trip.
Age also sets expectations with the caller. A dispatcher who hears "about fifteen years old, and the last company said it was on its way out" should note that for the tech and avoid promising a cheap fix. A dispatcher who hears "installed last spring by another company" should flag a possible warranty situation and ask who installed it.
A diagnostic fee is the flat amount the company charges for the technician to arrive and identify the problem, usually credited toward the repair if the customer approves it. Quote it on every call, in plain numbers, before booking. Callers who hear the fee for the first time from the technician cancel at the door.
How do you keep intake calls short during peak season?
Three rules.
First, the dispatcher asks, the caller answers. When the caller starts a full history, the dispatcher says "that helps, let me get a couple of specifics" and goes back to the list. Polite, and it cuts two minutes off the call.
Second, no diagnosis on the phone. "It sounds like the capacitor" turns into "you said it was a cheap part" at the door. The dispatcher's answer to "what do you think it is?" is "that is exactly what the technician will find out, and the diagnostic fee covers that visit."
Third, address and phone number get confirmed by reading them back, every call. A wrong digit in a phone number costs a technician forty minutes in a driveway waiting for someone who is not home.
Our position: a company that cannot answer every call during a heat wave does not have a staffing problem. It has a phone design problem, and the fix starts with a fixed list of questions and a triage table, not with another hire who improvises.
Example call: a no-cool in July, done in four minutes
This is a sample exchange, not a recording. It shows the list in use.
Caller: "My AC isn't working."
Dispatcher: "I can help. What is it doing right now, blowing warm air, or not coming on at all?"
Caller: "It's blowing, but it's warm."
Dispatcher: "Got it. Any smell of gas, or has a carbon monoxide alarm gone off?" "No." "When did it start?" "Last night." "What have you tried so far?" "I changed the filter and flipped the breaker." "Does the thermostat show anything on the screen?" "Yes, it says 82 and it's set to 74." "Is there a metal unit outside with a fan on top, and is the fan spinning?" "There is, and no, it's not spinning. It's humming."
Dispatcher: "That's useful for the technician. Roughly how old is the system, under five years, five to twelve, or older?" "Probably ten." "Can you read the brand off the outdoor unit?" "Carrier." "Any water on the floor near the indoor unit?" "No."
Dispatcher: "Address and anything that slows a tech down, gate, dog, side yard?" "4418 Elm, there's a dog, I'll put him inside." "Best number to text, and who'll be home?" "This number, I will." "Have we been out before, and are you on a maintenance plan?" "No, first time."
Dispatcher: "The diagnostic visit is $89, which goes toward the repair if you approve it. I have 1 to 3 today. Let me read your address back." Four minutes, and the ticket says: no cool, blowing warm, outdoor fan not spinning and humming, ten-year Carrier, filter and breaker tried, thermostat has power, dog, fee quoted. The technician loads a capacitor and a fan motor before leaving the shop and does not say either word to the caller.
Where this list stops working
The list assumes a residential service call. Commercial rooftop units, refrigeration, and new-construction calls need a different set of questions, mostly about access, tenant contacts, and who signs the work order.
It also assumes the dispatcher can book into a real calendar. If the schedule lives in a technician's head, no intake script fixes that. Put the calendar somewhere the dispatcher can see it before you work on the script.
And it does not cover the call where the caller is angry about a previous visit. That is a service recovery call, and it goes to the service manager, not through intake.
What a custom voice agent does with this list
The twelve questions above are the agent's script. When the office is on another line, or it is 9 pm in July, the voice agent asks the same questions in the same order, writes the answers into the job in the calendar and CRM the company already uses, applies the triage rules the owner set (freeze warning plus no heat equals same day, blank thermostat equals walk-through first), and quotes the diagnostic fee the owner set. On a gas smell it reads the safety script and ends the call the same way a trained dispatcher would. On anything outside its rules it transfers to the on-call number or takes a message, whichever the company chose. The dispatcher starts the morning with booked jobs that already have symptoms, equipment age, and gate codes attached.
Related reading: Route after-hours HVAC calls without burning out your on-call tech and The HVAC maintenance plan script for inbound calls. For what the agent does for HVAC companies, see the industry page.
If you want to see what the agent asks on your calls, with your triage rules, Book a Demo today.
Frequently asked questions
What is the most important question to ask on an HVAC service call?
Ask what the system is doing right now, in the caller's words, and then ask what they already tried. Those two answers decide whether the call is a safety issue, a same-day repair, or a scheduled visit, and they tell the technician what to load on the truck.
Should a dispatcher try to diagnose the problem over the phone?
No. The dispatcher collects symptoms, history and access details so the technician arrives prepared. Guessing at a cause on the phone sets a price expectation the technician then has to walk back, and it slows the call down for everyone.
What should the dispatcher say when a caller smells gas?
Tell the caller to leave the building, not touch light switches or appliances, and call the gas utility or 911 from outside. Book the HVAC visit after the utility has cleared the home. The script should be printed and read word for word.
How long should an HVAC intake call take?
Four to six minutes for a standard no-cool or no-heat call when the dispatcher follows a fixed order of questions. Calls run long when the dispatcher improvises, lets the caller narrate the whole history, or has to call back for the address or gate code.
What information does the technician actually need before arriving?
Symptoms in the caller's words, equipment type and rough age, brand if visible, whether the thermostat shows power, what the caller tried, access instructions, a working phone number, and whether a pet or a locked side yard will slow the visit down.
Sources
- Section 608 Technician Certification, U.S. Environmental Protection Agency
- People at Increased Risk for Heat-Related Illness, Centers for Disease Control and Prevention
- Carbon Monoxide Information Center, U.S. Consumer Product Safety Commission