Appliance repair scripts for warranty and landlord calls
Tark AI Team ยท
Warranty, landlord and property manager calls share one rule: the person calling is not the person paying, so the office finds out who pays and who authorizes before anything is booked. On a warranty call that means the manufacturer and its servicer list. On a tenant call it means the landlord's approval and a spending limit. Book against the payer, with the caller as the on-site contact.
The routing table
The dispatcher's first job on these calls is to sort them. Three questions do it: who owns the appliance, who is paying, and who can approve the repair.
| Caller | Likely payer | Who authorizes | What the dispatcher needs before booking |
|---|---|---|---|
| Homeowner, appliance under one year old | Manufacturer, if the failure is covered | Manufacturer, through its servicer network | Brand, model, serial, purchase date, whether you are an authorized servicer for that brand |
| Homeowner, appliance with an extended warranty or home warranty plan | The warranty company | The warranty company, by claim number | Claim or dispatch number, the plan's rate, what the customer's service fee is |
| Tenant | Landlord or property manager | Landlord or property manager | Account contact, written authorization, spending limit, tenant's availability |
| Property manager calling directly | The management company | The property manager, up to a limit | Unit number, tenant contact, authorization limit, billing email |
| Landlord calling about a rental | The landlord | The landlord | Tenant contact for access, authorization limit, whether the landlord wants a call before any repair over the limit |
An authorization limit is a pre-agreed dollar amount below which the technician may complete a repair without a phone call. Above it, the technician stops and quotes. Property managers who have one get same-visit repairs; property managers who do not get two visits and a tenant who has lived without a refrigerator for a week.
What do you say to a caller who says it is under warranty?
Most of these callers do not know what their warranty covers or who services it. The dispatcher's script is about finding that out without promising free work.
"Let's check that. When did you buy it, and do you have the model and serial number? They're on the sticker inside the door. We're an authorized servicer for [brands]; if yours is one of those, the manufacturer may cover the visit. If it isn't, I'll tell you who to call so you don't pay for something the warranty should cover."
Then one of three paths.
- You are the authorized servicer and the appliance is in warranty. Collect the serial, the purchase date and the proof of purchase requirement, open the claim the way the manufacturer requires, and book. The customer hears "the manufacturer covers this visit" only after the claim is accepted, not before.
- You are not the authorized servicer. Give the caller the manufacturer's service number and say that going through you would mean paying out of pocket for a repair that should be free. Most callers thank you and some come back when the warranty ends.
- The appliance is out of warranty or the failure is excluded (physical damage, installation, commercial use in a residential unit). Switch to the standard diagnostic fee script.
Federal rules on written warranties, including what a seller must disclose, are summarized in the FTC's Businessperson's Guide to Federal Warranty Law. The practical point for the dispatcher is simpler: do not tell a caller what their warranty covers. Tell them who decides and how to find out.
What do you say to a tenant?
Tenants call because the washer is broken and they do not know whose problem it is. The dispatcher's job is to take the report, get the landlord, and not book until the landlord has said yes.
"I can help with that. Since you're renting, the repair is normally the landlord's call, and I need their approval before I send a technician. Do you have the landlord or property manager's name and number? I'll contact them now, and the moment they approve it, I'll book the visit and text you the time."
Then the office calls or emails the landlord with the appliance, the symptom, the diagnostic fee, and a request for an authorization limit. The tenant gets a text with the time the request went out. Nothing is booked until the approval comes back.
Two mistakes to avoid. Do not book the visit and sort out payment later; that produces an unpaid invoice and a technician in the middle of a landlord-tenant dispute. And do not tell the tenant "your landlord has to call us"; the tenant will not get the landlord to do it, and the washer stays broken for a month.
How do you set up a property manager account so repairs happen on the first visit?
Get four things in writing, once, when the account opens.
- The authorization limit per repair, in dollars.
- The rule above the limit: call the property manager, email a quote, or replace at the manager's standing instruction for appliances over a certain age.
- Who gets the invoice and how (email, portal, mailed).
- Who the technician calls for access if the tenant does not answer.
With those on file, a property manager's call becomes "unit 4B, the dryer is not heating, tenant's number is X," and the dispatcher books it without a single question about money. Without them, every call is a negotiation, and the technician learns to stop at the door and call the office.
Our position: a repair company that chases property managers for approval one ticket at a time is doing unpaid administration for a customer who would happily sign a one-page limit agreement if anyone asked.
What does the ticket need on these calls?
Everything a normal ticket needs, plus the money fields.
- Payer: homeowner, manufacturer, warranty company, landlord, management company.
- Authorization: the claim number, the approver's name and the limit, or "pending" with the time the request went out.
- On-site contact and access, which is often a different person from the payer.
- What the caller was told about the fee, including "the manufacturer may cover this" if that was said, and "you will owe the diagnostic fee if it is excluded" if that was said.
A technician who reads "payer: landlord, limit $350, call manager above that" acts differently from one who reads nothing. The first one fixes the dryer. The second one stops at the door.
Example call: the tenant with a dead refrigerator
A sample exchange, not a recording.
Caller: "The fridge in my apartment stopped cooling. Can you come today?"
Dispatcher: "I can help with that. Since you're renting, the repair is normally the landlord or property manager's call, and I need their approval before I send a technician. Do you have their name and number?" "It's Greenway Property Management, I have the office number." "Great. Let me get the details so I can send them one message and not three. What brand, and is the freezer cold or warm too?" "Frigidaire. Both warm." "How long?" "Since this morning." "Unit number and the best number to text you?" "4B, this number."
Dispatcher: "Here's what happens now. I'm sending Greenway the request with the fridge, the symptom, and our diagnostic fee of $X, and asking for approval and a spending limit. The moment they approve, I'll book the visit and text you the time. I'm sending it at 10:14. If you don't hear from me by two, text me and I'll chase them."
Caller: "Can't you just come and bill them?"
Dispatcher: "I wish I could. If I send a tech without their okay, they can refuse the bill, and then you're in the middle of it. One message to them is faster than that argument. Do you want to call them too, in case they answer you first?"
The office sends the request and texts the tenant the time it went out. Greenway replies at 11:30 with a $300 limit. The visit is booked at 11:32 and the tenant has the time by 11:33. Nothing was booked on a promise nobody could keep.
Where these scripts stop working
Home warranty plans with their own dispatch systems have their own rules, rates and paperwork, and the plan's dispatch instructions override anything above.
Commercial accounts with dozens of units and a maintenance contract usually have a work-order system, and the account manager, not the dispatcher, handles authorization.
And callbacks on a repair you did under warranty for a landlord last month are not a new authorization; they are your warranty, and the dispatcher should book them without asking anyone's permission.
How a custom voice agent handles these calls
The agent asks who owns the appliance and who is paying before it talks about a visit. On a warranty call it collects brand, model, serial and purchase date, checks the owner's list of brands the company services under warranty, and either opens the intake or gives the caller the manufacturer's number. On a tenant call it takes the report, collects the landlord's contact, sends the authorization request to the office, and tells the tenant when it went out, without booking. On a property manager account it reads the authorization limit from the account and books straight into the calendar. The office stops being the place where payment questions get sorted out after the fact.
Related reading: Appliance repair intake questions that stop wasted truck rolls and How to quote an appliance repair diagnostic fee on the phone. For what the agent does for appliance repair companies, see the industry page.
To see how the agent routes a warranty or landlord call for your company, Book a Demo today.
Frequently asked questions
Who pays for an appliance repair when the tenant calls?
The landlord or property manager, almost always, and the repair should not be booked until that person has authorized it and given a spending limit. The tenant's call is a report, not an order. Book the visit against the account holder, with the tenant as the on-site contact.
What do you ask a caller who says the appliance is under warranty?
The purchase date, the brand, the model and serial number, and whether they have already contacted the manufacturer. Manufacturer warranties are usually serviced by authorized providers only, so the first question is whether you are one for that brand.
Should you charge a diagnostic fee on a warranty call?
Not if the manufacturer has authorized the repair and you are the authorized servicer; the manufacturer pays under its rate. If the appliance turns out to be out of warranty, or the failure is excluded, the customer owes the fee, and they should hear that possibility on the phone.
What is an authorization limit for a property manager?
A dollar amount the property manager has agreed to in advance, below which the technician may complete the repair without calling for approval. Above it, the technician stops, quotes, and waits. The limit should be on the account and on every ticket for that account.
What should a repair company do if the landlord cannot be reached?
Not book the visit. Tell the tenant the office has sent the request to the landlord and will book as soon as it is approved, and give the tenant the time the request was sent. Booking without authorization produces an unpaid invoice and an argument.
Sources
- Businessperson's Guide to Federal Warranty Law, Federal Trade Commission